海角社区

Tectonic plates outlined on the globe.

7 Major Tectonic Plates

If you think back to your middle school geography classes, you are sure to recall some manner of discussion about the Earth's聽tectonic plates. Perhaps you remember that the tectonic plates we presently recognize have been around for nearly all of the Earth's聽4.6 billion years聽of existence. Or maybe you recall that these plates move incredibly slowly, relative to how humans experience time and that this movement can cause earthquakes along fault lines as plates collide with, or separate from, each other. But besides these few facts, how much more do you know about tectonic plates and their impact on humans on a day-to-day basis? Below, we will consider what exactly tectonic plates are, where the largest plates can be found on Earth, and how plates interact with each other.

The Theory Of Plate Tectonics聽

The 海角社区 map with tectonic plate boundaries defined in red.
The 海角社区 map with tectonic plate boundaries defined in red.

Based upon the theory of聽continental drift, presented by Alfred Wegener on January 6, 1912, and incorporating geological and geophysical data, the theory of plate tectonics states that the Earth's outer shell is made up of separate plates which glide over the Earth's rocky inner layer, and interact with each other at their boundaries, that is the outermost border of a tectonic plate. This theory has been widely accepted in the scientific community since the middle of the 20th century. This theory explains how mountains are formed, why volcanoes exist, and why certain places have earthquakes and others do not.

What Is A Tectonic Plate?

There are three categories of tectonic plates based on their comparative sizes. There are major plates, minor plates, and microplates. Tectonic plates, also known as lithospheric plates, are massive, non-uniform pieces of solid rock whose layers include oceanic and/or continental crust and upper mantle, which are the two outermost layers of the Earth and together make up the聽lithosphere. Tectonic plates sit atop the asthenosphere, a partially molten rocky layer that allows tectonic plates to drift.聽

Most plates are made up of either oceanic or continental crust. However, some of the larger plates are comprised of both. For continental and oceanic crust to co-exist on one plate and for plate interactions between a continental plate and an oceanic plate to not result in the destruction of one of the plates, these two types of crust have been determined to have an equivalent weight to each other, this based upon their physical properties. Oceanic plates are thinner and more dense, while continental plates are thicker and less dense. This differential maintains a relative weight equivalency; both types of crust weigh the same when comparing pieces with the same surface area. This allows for plates comprised of continental and oceanic lithosphere to be balanced and for plates with both types of crust to interact with the asthenosphere in the same way.聽

The three types of tectonic plate boundaries.
The three types of tectonic plate boundaries.

While it is an outlier occurrence, sometimes smaller plates come into contact with larger plates, and their slight weight differential causes a 'sinking' of these smaller plates below the larger and heavier ones. There are three types of plate-to-plate boundary interactions defined by how a plate moves. These are divergent, convergent, and transform fault boundaries. It is when the boundaries of one plate interact with the boundaries of another plate that causes geologic phenomena such as聽earthquakes, the聽formation of mountains, and聽volcanic eruptions.

What Are The Seven Major Tectonic Plates?

Map showing some of the major and minor tectonic plates.
Map showing some of the major and minor tectonic plates.

While there are聽collectively fifteen tectonic plates聽when the entire Earth is considered, for the most part, it is seven tectonic plates that cover the majority of the Earth. These plates are the African plate, the Antarctic plate, the Eurasian plate, the Indo-Australian plate, the North American plate, the Pacific plate, and the South American plate, each named for the region of the Earth's crust that they encompass.

The African Plate: Also known as the Nubian Plate, the African plate is the fourth largest tectonic plate, covering 23,700,000 square miles of the Earth. The African plate is made up of both continental and oceanic lithosphere and encompasses the majority of the continent of聽Africa聽and about a third of the聽Atlantic Ocean. Its boundaries are both divergent and convergent, with the entire plate moving at an average rate of 2.5 centimeters per year.聽

The Antarctic Plate: The Antarctic Plate is the fifth largest tectonic plate. It is comprised of the entire continent of聽Antarctica聽as well as the surrounding oceans and so is made up of both continental and oceanic lithosphere. This plate covers 23,500,000 square miles of the Earth's surface. The boundaries of this plate are 95% divergent and 5% convergent, with the entire plate moving at an average rate of 1.0 centimeters per year.

The Eurasian Plate: The Eurasian Plate is comprised of most of聽Europe,听Russia, and聽China, as well as part of the聽Atlantic听补苍诲听Arctic Oceans. It is the third largest tectonic plate, spanning 26,200,000 square miles across the Earth. The Eurasian Plate has convergent, divergent, and transform fault boundaries and moves at a varying rate, anywhere from 0.7 centimeters per year to 1.4 centimeters per year.

The Indo-Australian Plate: The Indo-Australian Plate is comprised of parts of聽Australia听补苍诲听India聽as well as most of the聽Indian Ocean. It is the sixth largest tectonic plate, spanning 22,700,000 square miles across the Earth. The Indo-Australian Plate is comprised of two plates: the Australian Plate and the Indian Plate. More often than not, these two plates are considered one, as historically, it was assumed that they were, in fact, one single plate. This plate moves at a rate of 3.0 centimeters per year.

The North American Plate: The North American Plate, made up of both continental and oceanic crust, spans 29,000,000 square miles of the Earth. This makes it the second largest tectonic plate, only smaller than the聽Pacific聽plate. The North American plate extends over part of聽North America, the聽North Pole, northern聽Japan,听Greenland,听Cuba, and the聽Bahamas聽and moves at a rate of 2.3 centimeters per year.

The South American plate: The South American plate is comprised of聽South America聽as well as a large portion of the聽Atlantic Ocean. It is the seventh-largest tectonic plate and spans 16,800,000 square miles. At this size, the South American plate is the smallest of the seven major plates. This plate has convergent tectonic boundaries and, in recent years, has caused some catastrophic earthquakes. The South American plate moves from 2.7 to 3.4 centimeters per year.

The Pacific Ring of Fire (highlighted in red).
The Pacific Ring of Fire (highlighted in red).

The Pacific Plate: The Pacific Plate covers 40,000,000 square miles, making it the largest tectonic plate. This plate is comprised of the western portion of聽North America听补苍诲听Alaska聽and stretches across the聽Pacific Ocean聽to encompass the east coast of聽Japan听补苍诲听Indonesia. The Pacific Plate moves at a rate of 5.0 to 10.0 centimeters per year. The Pacific plate's boundaries primarily comprise the聽Pacific Ring of Fire, also known as the Circum-Pacific Belt and the Girdle of Fire. The Ring of Fire is the circular region defined by the boundaries of the Pacific plate, which has most of the active volcanos across the Earth as well as most of the earthquakes. The majority of the Ring of Fire is under the Pacific Ocean and is comprised of over 450 volcanoes.聽

How do Tectonic Plates Impact Our Lives?

While the movements of tectonic plates are, for the most part, undetectable without advanced scientific technology, there are some instances during which the movement of tectonic plates felt but that it is also destructive. Earthquakes, for example, are the result of the movement of different plates against each other along their boundaries. Where two plates meet is called a fault plane or fault line, and along these fault lines, the chance of tectonic earthquakes, also known as interplate earthquakes, is drastically elevated compared to locations in the middle of a plate.聽

There are three types of fault lines: normal, reverse, and strike-slip. This refers to what position two plates lock into each other. After two plates are locked, the continued movement of the plates towards, away or against each other results in stored strain energy to build. When that energy is released, you get an earthquake.

The movement of tectonic plates also causes volcanic eruptions. A volcanic eruption is defined as when lava (molten rock), volcanic ash, and/or gases vent through an opening in the Earth's crust. At its simplest definition, a volcano is a vent for the high-pressure environment of underground magma chambers.

Formation of volcanoes at subduction zones.
Formation of volcanoes at subduction zones of tectonic plates.

Above the ground, volcanoes are created as one tectonic plate is forced under another. Most often, this occurs when a thin and dense oceanic plate moves under a thicker and less dense continental plate. As this process occurs, magma chambers are created. The volume of magma in these chambers slowly increases, and when enough pressure builds up, the most likely result is a volcanic eruption. Underneath the Earth's oceans, this process happens differently. Underwater volcanoes are found along cracks that are created by tectonic plates moving away from each other. When this happens, it releases magma, which fills the space created by the separating plates. Both of these processes are observed along the Ring of Fire at a much higher rate than any place else on the Earth.

Map of the San Andreas fault in California
Map of the San Andreas fault in California.

It is important to know where fault lines run as well as how tectonic plates interact with each other so that when infrastructure is planned and built, the architects and engineers take into consideration the need to create earthquake-resistant buildings. Buildings that are built in places such as聽San Fransisco听补苍诲听Los Angeles, which are along the Ring of Fire, are built on top of flexible pads, which are composed of rubber, steel, and lead so that they do not collapse at the slightest tremor.

In terms of volcanos, knowing how tectonic movements have in the past caused eruptions can allow for early warning systems to warn those in dangerous proximity to these volcanoes to evacuate. While there have been many historical tragedies caused by tectonic plate movement, by understanding tectonic plates we can endeavor to minimize the impact of potential future quakes and eruptions and hopefully save lives.

Share

More in Geography